09 October, 2016

Manual User Equivalence (Key-Based Authentication) Configuration

Assuming we have a two node cluster (rac1.localdomain, rac2.localdomain), log in as the “oracle” user and perform the following tasks on each node.
su - oracle
mkdir ~/.ssh
chmod 700 ~/.ssh
/usr/bin/ssh-keygen -t rsa # Accept the default settings.
The RSA public key is written to the ~/.ssh/id_rsa.pub file and the private key to the ~/.ssh/id_rsa file.
Log in as the “oracle” user on rac1.localdomain, generate an “authorized_keys” file and copy it to rac2.localdomainusing the following commands.
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac2.localdomain:/home/oracle/.ssh/
Next, log in as the “oracle” user on rac2.localdomain and perform the following commands.
su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac1.localdomain:/home/oracle/.ssh/
The “authorized_keys” file on both servers now contains the public keys generated on all nodes.
To enable SSH user equivalency on the cluster member nodes issue the following commands on each node.
ssh rac1 date ssh rac2 date ssh rac1.localdomain date ssh rac2.localdomain date exec /usr/bin/ssh-agent $SHELL /usr/bin/ssh-add
But we need to work on configure ssh on 3 node rac for oracle user!!!
Copy hosts file from rac3 to the rest of the 2 servers rac1 and rac2.
Copy nslookup file from /usr/bin from rac1 to rac3
cluvfy stage -pre nodeadd -n rac3 -fixup -verbose

26
Performing pre-checks for node addition
Checking node reachability...
Check: Node reachability from node "rac1"
 Destination Node Reachable? 
 ------------------------------------ ------------------------
 rac3 yes 
Result: Node reachability check passed from node "rac1"

Checking user equivalence...
Check: User equivalence for user "oracle"
 Node Name Status 
 ------------------------------------ ------------------------
 rac3 passed 
Result: User equivalence check passed for user "oracle"
Checking node connectivity...
Checking hosts config file...
 Node Name Status 
 ------------------------------------ ------------------------
 rac1 passed 
 rac2 passed 
 rac3 passed
Verification of the hosts config file successful

Interface information for node "rac1"
 Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
 ------ --------------- --------------- --------------- --------------- ----------------- ------
 eth0 192.168.56.71 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.81 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.91 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth1 192.168.10.1 192.168.10.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth1 169.254.149.126 169.254.0.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth2 192.168.1.8 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:94:63:1F 1500

Interface information for node "rac2"
 Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
 ------ --------------- --------------- --------------- --------------- ----------------- ------
 eth0 192.168.56.72 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.92 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.93 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.82 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth1 192.168.10.2 192.168.10.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth1 169.254.184.13 169.254.0.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth2 192.168.1.7 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:94:63:1F 1500

Interface information for node "rac3"
 Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
 ------ --------------- --------------- --------------- --------------- ----------------- ------
 eth0 192.168.56.73 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth1 192.168.10.3 192.168.10.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth2 192.168.1.9 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:94:63:1F 1500

Check: Node connectivity for interface "eth0"
 Source Destination Connected? 
 ------------------------------ ------------------------------ ----------------
 rac1[192.168.56.71] rac1[192.168.56.81] yes 
 rac1[192.168.56.71] rac1[192.168.56.91] yes 
 rac1[192.168.56.71] rac2[192.168.56.72] yes 
 rac1[192.168.56.71] rac2[192.168.56.92] yes 
 rac1[192.168.56.71] rac2[192.168.56.93] yes 
 rac1[192.168.56.71] rac2[192.168.56.82] yes 
 rac1[192.168.56.71] rac3[192.168.56.73] yes 
 rac1[192.168.56.81] rac1[192.168.56.91] yes 
 rac1[192.168.56.81] rac2[192.168.56.72] yes 
 rac1[192.168.56.81] rac2[192.168.56.92] yes 
 rac1[192.168.56.81] rac2[192.168.56.93] yes 
 rac1[192.168.56.81] rac2[192.168.56.82] yes 
 rac1[192.168.56.81] rac3[192.168.56.73] yes 
 rac1[192.168.56.91] rac2[192.168.56.72] yes 
 rac1[192.168.56.91] rac2[192.168.56.92] yes 
 rac1[192.168.56.91] rac2[192.168.56.93] yes 
 rac1[192.168.56.91] rac2[192.168.56.82] yes 
 rac1[192.168.56.91] rac3[192.168.56.73] yes 
 rac2[192.168.56.72] rac2[192.168.56.92] yes 
 rac2[192.168.56.72] rac2[192.168.56.93] yes 
 rac2[192.168.56.72] rac2[192.168.56.82] yes 
 rac2[192.168.56.72] rac3[192.168.56.73] yes 
 rac2[192.168.56.92] rac2[192.168.56.93] yes 
 rac2[192.168.56.92] rac2[192.168.56.82] yes 
 rac2[192.168.56.92] rac3[192.168.56.73] yes 
 rac2[192.168.56.93] rac2[192.168.56.82] yes 
 rac2[192.168.56.93] rac3[192.168.56.73] yes 
 rac2[192.168.56.82] rac3[192.168.56.73] yes 
Result: Node connectivity passed for interface "eth0"

Check: TCP connectivity of subnet "192.168.56.0"
 Source Destination Connected? 
 ------------------------------ ------------------------------ ----------------
 rac1:192.168.56.71 rac1:192.168.56.81 passed 
 rac1:192.168.56.71 rac1:192.168.56.91 passed 
 rac1:192.168.56.71 rac2:192.168.56.72 passed 
 rac1:192.168.56.71 rac2:192.168.56.92 passed 
 rac1:192.168.56.71 rac2:192.168.56.93 passed 
 rac1:192.168.56.71 rac2:192.168.56.82 passed 
 rac1:192.168.56.71 rac3:192.168.56.73 passed 
Result: TCP connectivity check passed for subnet "192.168.56.0"
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "192.168.56.0".
Subnet mask consistency check passed.
Result: Node connectivity check passed
Checking multicast communication...
Checking subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0"...
Check of subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0" passed.
Check of multicast communication passed.
Checking CRS integrity...
Clusterware version consistency passed
The Oracle Clusterware is healthy on node "rac1"
The Oracle Clusterware is healthy on node "rac2"
CRS integrity check passed
Checking shared resources...
Checking CRS home location...
"/u01/app/11.2.0/grid" is shared
Result: Shared resources check for node addition passed

Checking node connectivity...
Checking hosts config file...
 Node Name Status 
 ------------------------------------ ------------------------
 rac1 passed 
 rac2 passed 
 rac3 passed
Verification of the hosts config file successful

Interface information for node "rac1"
 Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
 ------ --------------- --------------- --------------- --------------- ----------------- ------
 eth0 192.168.56.71 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.81 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.91 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth1 192.168.10.1 192.168.10.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth1 169.254.149.126 169.254.0.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth2 192.168.1.8 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:94:63:1F 1500

Interface information for node "rac2"
 Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
 ------ --------------- --------------- --------------- --------------- ----------------- ------
 eth0 192.168.56.72 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.92 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.93 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth0 192.168.56.82 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth1 192.168.10.2 192.168.10.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth1 169.254.184.13 169.254.0.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth2 192.168.1.7 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:94:63:1F 1500

Interface information for node "rac3"
 Name IP Address Subnet Gateway Def. Gateway HW Address MTU 
 ------ --------------- --------------- --------------- --------------- ----------------- ------
 eth0 192.168.56.73 192.168.56.0 0.0.0.0 192.168.1.1 08:00:27:CF:4E:CA 1500 
 eth1 192.168.10.3 192.168.10.0 0.0.0.0 192.168.1.1 08:00:27:3D:56:40 1500 
 eth2 192.168.1.9 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:94:63:1F 1500

Check: Node connectivity for interface "eth0"
 Source Destination Connected? 
 ------------------------------ ------------------------------ ----------------
 rac1[192.168.56.71] rac1[192.168.56.81] yes 
 rac1[192.168.56.71] rac1[192.168.56.91] yes 
 rac1[192.168.56.71] rac2[192.168.56.72] yes 
 rac1[192.168.56.71] rac2[192.168.56.92] yes 
 rac1[192.168.56.71] rac2[192.168.56.93] yes 
 rac1[192.168.56.71] rac2[192.168.56.82] yes 
 rac1[192.168.56.71] rac3[192.168.56.73] yes 
 rac1[192.168.56.81] rac1[192.168.56.91] yes 
 rac1[192.168.56.81] rac2[192.168.56.72] yes 
 rac1[192.168.56.81] rac2[192.168.56.92] yes 
 rac1[192.168.56.81] rac2[192.168.56.93] yes 
 rac1[192.168.56.81] rac2[192.168.56.82] yes 
 rac1[192.168.56.81] rac3[192.168.56.73] yes 
 rac1[192.168.56.91] rac2[192.168.56.72] yes 
 rac1[192.168.56.91] rac2[192.168.56.92] yes 
 rac1[192.168.56.91] rac2[192.168.56.93] yes 
 rac1[192.168.56.91] rac2[192.168.56.82] yes 
 rac1[192.168.56.91] rac3[192.168.56.73] yes 
 rac2[192.168.56.72] rac2[192.168.56.92] yes 
 rac2[192.168.56.72] rac2[192.168.56.93] yes 
 rac2[192.168.56.72] rac2[192.168.56.82] yes 
 rac2[192.168.56.72] rac3[192.168.56.73] yes 
 rac2[192.168.56.92] rac2[192.168.56.93] yes 
 rac2[192.168.56.92] rac2[192.168.56.82] yes 
 rac2[192.168.56.92] rac3[192.168.56.73] yes 
 rac2[192.168.56.93] rac2[192.168.56.82] yes 
 rac2[192.168.56.93] rac3[192.168.56.73] yes 
 rac2[192.168.56.82] rac3[192.168.56.73] yes 
Result: Node connectivity passed for interface "eth0"

Check: TCP connectivity of subnet "192.168.56.0"
 Source Destination Connected? 
 ------------------------------ ------------------------------ ----------------
 rac1:192.168.56.71 rac1:192.168.56.81 passed 
 rac1:192.168.56.71 rac1:192.168.56.91 passed 
 rac1:192.168.56.71 rac2:192.168.56.72 passed 
 rac1:192.168.56.71 rac2:192.168.56.92 passed 
 rac1:192.168.56.71 rac2:192.168.56.93 passed 
 rac1:192.168.56.71 rac2:192.168.56.82 passed 
 rac1:192.168.56.71 rac3:192.168.56.73 passed 
Result: TCP connectivity check passed for subnet "192.168.56.0"

Check: Node connectivity for interface "eth1"
 Source Destination Connected? 
 ------------------------------ ------------------------------ ----------------
 rac1[192.168.10.1] rac2[192.168.10.2] yes 
 rac1[192.168.10.1] rac3[192.168.10.3] yes 
 rac2[192.168.10.2] rac3[192.168.10.3] yes 
Result: Node connectivity passed for interface "eth1"

Check: TCP connectivity of subnet "192.168.10.0"
 Source Destination Connected? 
 ------------------------------ ------------------------------ ----------------
 rac1:192.168.10.1 rac2:192.168.10.2 passed 
 rac1:192.168.10.1 rac3:192.168.10.3 passed 
Result: TCP connectivity check passed for subnet "192.168.10.0"
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "192.168.56.0".
Subnet mask consistency check passed for subnet "192.168.10.0".
Subnet mask consistency check passed.
Result: Node connectivity check passed
Checking multicast communication...
Checking subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0"...
Check of subnet "192.168.56.0" for multicast communication with multicast group "230.0.1.0" passed.
Checking subnet "192.168.10.0" for multicast communication with multicast group "230.0.1.0"...
Check of subnet "192.168.10.0" for multicast communication with multicast group "230.0.1.0" passed.
Check of multicast communication passed.
Check: Total memory 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 2.9401GB (3082932.0KB) 1.5GB (1572864.0KB) passed 
 rac3 2.9401GB (3082932.0KB) 1.5GB (1572864.0KB) passed 
Result: Total memory check passed
Check: Available memory 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 1.8159GB (1904084.0KB) 50MB (51200.0KB) passed 
 rac3 2.7753GB (2910084.0KB) 50MB (51200.0KB) passed 
Result: Available memory check passed
Check: Swap space 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 2.9531GB (3096572.0KB) 2.9401GB (3082932.0KB) passed 
 rac3 2.9531GB (3096572.0KB) 2.9401GB (3082932.0KB) passed 
Result: Swap space check passed
Check: Free disk space for "rac1:/u01/app/11.2.0/grid,rac1:/tmp" 
 Path Node Name Mount point Available Required Status 
 ---------------- ------------ ------------ ------------ ------------ ------------
 /u01/app/11.2.0/grid rac1 / 25.9531GB 7.5GB passed 
 /tmp rac1 / 25.9531GB 7.5GB passed 
Result: Free disk space check passed for "rac1:/u01/app/11.2.0/grid,rac1:/tmp"
Check: Free disk space for "rac3:/u01/app/11.2.0/grid,rac3:/tmp" 
 Path Node Name Mount point Available Required Status 
 ---------------- ------------ ------------ ------------ ------------ ------------
 /u01/app/11.2.0/grid rac3 / 35.8145GB 7.5GB passed 
 /tmp rac3 / 35.8145GB 7.5GB passed 
Result: Free disk space check passed for "rac3:/u01/app/11.2.0/grid,rac3:/tmp"
Check: User existence for "oracle" 
 Node Name Status Comment 
 ------------ ------------------------ ------------------------
 rac1 passed exists(1100) 
 rac3 passed exists(1100)
Checking for multiple users with UID value 1100
Result: Check for multiple users with UID value 1100 passed 
Result: User existence check passed for "oracle"
Check: Run level 
 Node Name run level Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 5 3,5 passed 
 rac3 5 3,5 passed 
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors" 
 Node Name Type Available Required Status 
 ---------------- ------------ ------------ ------------ ----------------
 rac1 hard 65536 65536 passed 
 rac3 hard 65536 65536 passed 
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors" 
 Node Name Type Available Required Status 
 ---------------- ------------ ------------ ------------ ----------------
 rac1 soft 4096 1024 passed 
 rac3 soft 4096 1024 passed 
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes" 
 Node Name Type Available Required Status 
 ---------------- ------------ ------------ ------------ ----------------
 rac1 hard 16384 16384 passed 
 rac3 hard 16384 16384 passed 
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes" 
 Node Name Type Available Required Status 
 ---------------- ------------ ------------ ------------ ----------------
 rac1 soft 2047 2047 passed 
 rac3 soft 2047 2047 passed 
Result: Soft limits check passed for "maximum user processes"
Check: System architecture 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 x86_64 x86_64 passed 
 rac3 x86_64 x86_64 passed 
Result: System architecture check passed
Check: Kernel version 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 3.8.13-16.3.1.el6uek.x86_64 2.6.32 passed 
 rac3 3.8.13-16.3.1.el6uek.x86_64 2.6.32 passed 
Result: Kernel version check passed
Check: Kernel parameter for "semmsl" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 250 250 250 passed 
 rac3 250 250 250 passed 
Result: Kernel parameter check passed for "semmsl"
Check: Kernel parameter for "semmns" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 32000 32000 32000 passed 
 rac3 32000 32000 32000 passed 
Result: Kernel parameter check passed for "semmns"
Check: Kernel parameter for "semopm" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 100 100 100 passed 
 rac3 100 100 100 passed 
Result: Kernel parameter check passed for "semopm"
Check: Kernel parameter for "semmni" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 128 128 128 passed 
 rac3 128 128 128 passed 
Result: Kernel parameter check passed for "semmni"
Check: Kernel parameter for "shmmax" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 68719476736 68719476736 1578461184 passed 
 rac3 68719476736 68719476736 1578461184 passed 
Result: Kernel parameter check passed for "shmmax"
Check: Kernel parameter for "shmmni" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 4096 4096 4096 passed 
 rac3 4096 4096 4096 passed 
Result: Kernel parameter check passed for "shmmni"
Check: Kernel parameter for "shmall" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 4294967296 4294967296 2097152 passed 
 rac3 4294967296 4294967296 2097152 passed 
Result: Kernel parameter check passed for "shmall"
Check: Kernel parameter for "file-max" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 6815744 6815744 6815744 passed 
 rac3 6815744 6815744 6815744 passed 
Result: Kernel parameter check passed for "file-max"
Check: Kernel parameter for "ip_local_port_range" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 between 9000.0 & 65500.0 between 9000.0 & 65500.0 between 9000.0 & 65500.0 passed 
 rac3 between 9000.0 & 65500.0 between 9000.0 & 65500.0 between 9000.0 & 65500.0 passed 
Result: Kernel parameter check passed for "ip_local_port_range"
Check: Kernel parameter for "rmem_default" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 262144 262144 262144 passed 
 rac3 262144 262144 262144 passed 
Result: Kernel parameter check passed for "rmem_default"
Check: Kernel parameter for "rmem_max" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 4194304 4194304 4194304 passed 
 rac3 4194304 4194304 4194304 passed 
Result: Kernel parameter check passed for "rmem_max"
Check: Kernel parameter for "wmem_default" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 262144 262144 262144 passed 
 rac3 262144 262144 262144 passed 
Result: Kernel parameter check passed for "wmem_default"
Check: Kernel parameter for "wmem_max" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 1048586 1048586 1048576 passed 
 rac3 1048586 1048586 1048576 passed 
Result: Kernel parameter check passed for "wmem_max"
Check: Kernel parameter for "aio-max-nr" 
 Node Name Current Configured Required Status Comment 
 ---------------- ------------ ------------ ------------ ------------ ------------
 rac1 1048576 1048576 1048576 passed 
 rac3 1048576 1048576 1048576 passed 
Result: Kernel parameter check passed for "aio-max-nr"
Check: Package existence for "binutils" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 binutils-2.20.51.0.2-5.36.el6 binutils-2.20.51.0.2 passed 
 rac3 binutils-2.20.51.0.2-5.36.el6 binutils-2.20.51.0.2 passed 
Result: Package existence check passed for "binutils"
Check: Package existence for "compat-libcap1" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 compat-libcap1-1.10-1 compat-libcap1-1.10 passed 
 rac3 compat-libcap1-1.10-1 compat-libcap1-1.10 passed 
Result: Package existence check passed for "compat-libcap1"
Check: Package existence for "compat-libstdc++-33(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed 
 rac3 compat-libstdc++-33(x86_64)-3.2.3-69.el6 compat-libstdc++-33(x86_64)-3.2.3 passed 
Result: Package existence check passed for "compat-libstdc++-33(x86_64)"
Check: Package existence for "libgcc(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 libgcc(x86_64)-4.4.7-4.el6 libgcc(x86_64)-4.4.4 passed 
 rac3 libgcc(x86_64)-4.4.7-4.el6 libgcc(x86_64)-4.4.4 passed 
Result: Package existence check passed for "libgcc(x86_64)"
Check: Package existence for "libstdc++(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 libstdc++(x86_64)-4.4.7-4.el6 libstdc++(x86_64)-4.4.4 passed 
 rac3 libstdc++(x86_64)-4.4.7-4.el6 libstdc++(x86_64)-4.4.4 passed 
Result: Package existence check passed for "libstdc++(x86_64)"
Check: Package existence for "libstdc++-devel(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 libstdc++-devel(x86_64)-4.4.7-4.el6 libstdc++-devel(x86_64)-4.4.4 passed 
 rac3 libstdc++-devel(x86_64)-4.4.7-4.el6 libstdc++-devel(x86_64)-4.4.4 passed 
Result: Package existence check passed for "libstdc++-devel(x86_64)"
Check: Package existence for "sysstat" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 sysstat-9.0.4-22.el6 sysstat-9.0.4 passed 
 rac3 sysstat-9.0.4-22.el6 sysstat-9.0.4 passed 
Result: Package existence check passed for "sysstat"
Check: Package existence for "gcc" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 gcc-4.4.7-4.el6 gcc-4.4.4 passed 
 rac3 gcc-4.4.7-4.el6 gcc-4.4.4 passed 
Result: Package existence check passed for "gcc"
Check: Package existence for "gcc-c++" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 gcc-c++-4.4.7-4.el6 gcc-c++-4.4.4 passed 
 rac3 gcc-c++-4.4.7-4.el6 gcc-c++-4.4.4 passed 
Result: Package existence check passed for "gcc-c++"
Check: Package existence for "ksh" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 ksh-20120801-10.el6 ksh-20100621 passed 
 rac3 ksh-20120801-10.el6 ksh-20100621 passed 
Result: Package existence check passed for "ksh"
Check: Package existence for "make" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 make-3.81-20.el6 make-3.81 passed 
 rac3 make-3.81-20.el6 make-3.81 passed 
Result: Package existence check passed for "make"
Check: Package existence for "glibc(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 glibc(x86_64)-2.12-1.132.el6 glibc(x86_64)-2.12 passed 
 rac3 glibc(x86_64)-2.12-1.132.el6 glibc(x86_64)-2.12 passed 
Result: Package existence check passed for "glibc(x86_64)"
Check: Package existence for "glibc-devel(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 glibc-devel(x86_64)-2.12-1.132.el6 glibc-devel(x86_64)-2.12 passed 
 rac3 glibc-devel(x86_64)-2.12-1.132.el6 glibc-devel(x86_64)-2.12 passed 
Result: Package existence check passed for "glibc-devel(x86_64)"
Check: Package existence for "libaio(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed 
 rac3 libaio(x86_64)-0.3.107-10.el6 libaio(x86_64)-0.3.107 passed 
Result: Package existence check passed for "libaio(x86_64)"
Check: Package existence for "libaio-devel(x86_64)" 
 Node Name Available Required Status 
 ------------ ------------------------ ------------------------ ----------
 rac1 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed 
 rac3 libaio-devel(x86_64)-0.3.107-10.el6 libaio-devel(x86_64)-0.3.107 passed 
Result: Package existence check passed for "libaio-devel(x86_64)"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID 
Result: Current group ID check passed
Starting check for consistency of primary group of root user
 Node Name Status 
 ------------------------------------ ------------------------
 rac1 passed 
 rac3 passed
Check for consistency of root user's primary group passed
Checking OCR integrity...
OCR integrity check passed
Checking Oracle Cluster Voting Disk configuration...
Oracle Cluster Voting Disk configuration check passed
Check: Time zone consistency 
Result: Time zone consistency check passed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
 Node Name Running? 
 ------------------------------------ ------------------------
 rac1 no 
 rac3 yes 
Result: Liveness check failed for "ntpd"
PRVF-5508 : NTP configuration file is present on at least one node on which NTP daemon or service is not running.
Result: Clock synchronization check using Network Time Protocol(NTP) failed

Checking to make sure user "oracle" is not in "root" group
 Node Name Status Comment 
 ------------ ------------------------ ------------------------
 rac1 passed does not exist 
 rac3 passed does not exist 
Result: User "oracle" is not part of "root" group. Check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
File "/etc/resolv.conf" does not have both domain and search entries defined
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
domain entry in file "/etc/resolv.conf" is consistent across nodes
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
search entry in file "/etc/resolv.conf" is consistent across nodes
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
All nodes have one search entry defined in file "/etc/resolv.conf"
Checking all nodes to make sure that search entry is "localdomain" as found on node "rac1"
All nodes of the cluster have same value for 'search'
Checking DNS response time for an unreachable node
 Node Name Status 
 ------------------------------------ ------------------------
 rac1 failed 
 rac3 failed 
PRVF-5636 : The DNS response time for an unreachable node exceeded "15000" ms on following nodes: rac3
File "/etc/resolv.conf" is not consistent across nodes

Pre-check for node addition was unsuccessful on all the nodes. 
[root@rac1 Desktop]#

The above errors can be ignored
[oracle@rac1 bin]$ export IGNORE_PREADDNODE_CHECKS=Y
[oracle@rac1 bin]$ export ORACLE_HOME=/u01/app/11.2.0/grid
[oracle@rac1 bin]$ d $ORACLE_HOME/oui/bin
-bash: d: command not found
[oracle@rac1 bin]$ cd $ORACLE_HOME/oui/bin
[oracle@rac1 bin]$ ./addNode.sh -silent “CLUSTER_NEW_NODES={rac3}” “CLUSTER_NEW_VIRTUAL_HOSTNAMES={rac3-vip}” “CLUSTER_NEW_PRIVATE_NODE_NAMES={rac3-priv}”
27

30

31
32
Run the “root.sh” commands on the new rac3 node as directed
First run /u01/app/oraInventory/orainstRoot.sh
And then root.sh
33
Execute root.sh
34
[root@rac3 grid]# pwd
/u01/app/11.2.0/grid
[root@rac3 grid]# ./root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
 ORACLE_OWNER= oracle
 ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
 Copying oraenv to /usr/local/bin ...
 Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
Adding Clusterware entries to upstart
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node rac1, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
clscfg: EXISTING configuration version 5 detected.
clscfg: version 5 is 11g Release 2.
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configure Oracle Grid Infrastructure for a Cluster ... succeeded
grep for the services owned by oracle user on rac3 node
35
Now we will work on Extending the Oracle Database Software on rac3 node
From an existing node i.e rac1 – as the database software owner – run the following command to extend the Oracle database software to the new node “rac3”
[root@rac1 Desktop]# su - oracle
[oracle@rac1 ~]$ export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1/
[oracle@rac1 ~]$ cd $ORACLE_HOME/oui/bin 
[oracle@rac1 bin]$ ./addNode.sh -silent "CLUSTER_NEW_NODES={rac3}"
38
[root@rac1 Desktop]# su - oracle
[oracle@rac1 ~]$ export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1/
[oracle@rac1 ~]$ cd $ORACLE_HOME/oui/bin 
[oracle@rac1 bin]$ ./addNode.sh -silent "CLUSTER_NEW_NODES={rac3}"
Performing pre-checks for node addition
Checking node reachability...
Node reachability check passed from node "rac1"

Checking user equivalence...
User equivalence check passed for user "oracle"
WARNING: 
Node "rac3" already appears to be part of cluster
Pre-check for node addition was successful. 
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 3013 MB Passed
Oracle Universal Installer, Version 11.2.0.3.0 Production
Copyright (C) 1999, 2011, Oracle. All rights reserved.

Performing tests to see whether nodes rac2,rac3 are available
............................................................... 100% Done.
......
-----------------------------------------------------------------------------
Cluster Node Addition Summary
Global Settings
 Source: /u01/app/oracle/product/11.2.0/dbhome_1
 New Nodes
Space Requirements
 New Nodes
 rac3
 /: Required 4.09GB : Available 30.24GB
Installed Products
 Product Names
 Oracle Database 11g 11.2.0.3.0 
 Sun JDK 1.5.0.30.03 
 Installer SDK Component 11.2.0.3.0 
 Oracle One-Off Patch Installer 11.2.0.1.7 
 Oracle Universal Installer 11.2.0.3.0 
 Oracle USM Deconfiguration 11.2.0.3.0 
 Oracle Configuration Manager Deconfiguration 10.3.1.0.0 
 Oracle DBCA Deconfiguration 11.2.0.3.0 
 Oracle RAC Deconfiguration 11.2.0.3.0 
 Oracle Database Deconfiguration 11.2.0.3.0 
 Oracle Configuration Manager Client 10.3.2.1.0 
 Oracle Configuration Manager 10.3.5.0.1 
 Oracle ODBC Driverfor Instant Client 11.2.0.3.0 
 LDAP Required Support Files 11.2.0.3.0 
 SSL Required Support Files for InstantClient 11.2.0.3.0 
 Bali Share 1.1.18.0.0 
 Oracle Extended Windowing Toolkit 3.4.47.0.0 
 Oracle JFC Extended Windowing Toolkit 4.2.36.0.0 
 Oracle Real Application Testing 11.2.0.3.0 
 Oracle Database Vault J2EE Application 11.2.0.3.0 
 Oracle Label Security 11.2.0.3.0 
 Oracle Data Mining RDBMS Files 11.2.0.3.0 
 Oracle OLAP RDBMS Files 11.2.0.3.0 
 Oracle OLAP API 11.2.0.3.0 
 Platform Required Support Files 11.2.0.3.0 
 Oracle Database Vault option 11.2.0.3.0 
 Oracle RAC Required Support Files-HAS 11.2.0.3.0 
 SQL*Plus Required Support Files 11.2.0.3.0 
 Oracle Display Fonts 9.0.2.0.0 
 Oracle Ice Browser 5.2.3.6.0 
 Oracle JDBC Server Support Package 11.2.0.3.0 
 Oracle SQL Developer 11.2.0.3.0 
 Oracle Application Express 11.2.0.3.0 
 XDK Required Support Files 11.2.0.3.0 
 RDBMS Required Support Files for Instant Client 11.2.0.3.0 
 SQLJ Runtime 11.2.0.3.0 
 Database Workspace Manager 11.2.0.3.0 
 RDBMS Required Support Files Runtime 11.2.0.3.0 
 Oracle Globalization Support 11.2.0.3.0 
 Exadata Storage Server 11.2.0.1.0 
 Provisioning Advisor Framework 10.2.0.4.3 
 Enterprise Manager Database Plugin -- Repository Support 11.2.0.3.0 
 Enterprise Manager Repository Core Files 10.2.0.4.4 
 Enterprise Manager Database Plugin -- Agent Support 11.2.0.3.0 
 Enterprise Manager Grid Control Core Files 10.2.0.4.4 
 Enterprise Manager Common Core Files 10.2.0.4.4 
 Enterprise Manager Agent Core Files 10.2.0.4.4 
 RDBMS Required Support Files 11.2.0.3.0 
 regexp 2.1.9.0.0 
 Agent Required Support Files 10.2.0.4.3 
 Oracle 11g Warehouse Builder Required Files 11.2.0.3.0 
 Oracle Notification Service (eONS) 11.2.0.3.0 
 Oracle Text Required Support Files 11.2.0.3.0 
 Parser Generator Required Support Files 11.2.0.3.0 
 Oracle Database 11g Multimedia Files 11.2.0.3.0 
 Oracle Multimedia Java Advanced Imaging 11.2.0.3.0 
 Oracle Multimedia Annotator 11.2.0.3.0 
 Oracle JDBC/OCI Instant Client 11.2.0.3.0 
 Oracle Multimedia Locator RDBMS Files 11.2.0.3.0 
 Precompiler Required Support Files 11.2.0.3.0 
 Oracle Core Required Support Files 11.2.0.3.0 
 Sample Schema Data 11.2.0.3.0 
 Oracle Starter Database 11.2.0.3.0 
 Oracle Message Gateway Common Files 11.2.0.3.0 
 Oracle XML Query 11.2.0.3.0 
 XML Parser for Oracle JVM 11.2.0.3.0 
 Oracle Help For Java 4.2.9.0.0 
 Installation Plugin Files 11.2.0.3.0 
 Enterprise Manager Common Files 10.2.0.4.3 
 Expat libraries 2.0.1.0.1 
 Deinstallation Tool 11.2.0.3.0 
 Oracle Quality of Service Management (Client) 11.2.0.3.0 
 Perl Modules 5.10.0.0.1 
 JAccelerator (COMPANION) 11.2.0.3.0 
 Oracle Containers for Java 11.2.0.3.0 
 Perl Interpreter 5.10.0.0.2 
 Oracle Net Required Support Files 11.2.0.3.0 
 Secure Socket Layer 11.2.0.3.0 
 Oracle Universal Connection Pool 11.2.0.3.0 
 Oracle JDBC/THIN Interfaces 11.2.0.3.0 
 Oracle Multimedia Client Option 11.2.0.3.0 
 Oracle Java Client 11.2.0.3.0 
 Character Set Migration Utility 11.2.0.3.0 
 Oracle Code Editor 1.2.1.0.0I 
 PL/SQL Embedded Gateway 11.2.0.3.0 
 OLAP SQL Scripts 11.2.0.3.0 
 Database SQL Scripts 11.2.0.3.0 
 Oracle Locale Builder 11.2.0.3.0 
 Oracle Globalization Support 11.2.0.3.0 
 SQL*Plus Files for Instant Client 11.2.0.3.0 
 Required Support Files 11.2.0.3.0 
 Oracle Database User Interface 2.2.13.0.0 
 Oracle ODBC Driver 11.2.0.3.0 
 Oracle Notification Service 11.2.0.3.0 
 XML Parser for Java 11.2.0.3.0 
 Oracle Security Developer Tools 11.2.0.3.0 
 Oracle Wallet Manager 11.2.0.3.0 
 Cluster Verification Utility Common Files 11.2.0.3.0 
 Oracle Clusterware RDBMS Files 11.2.0.3.0 
 Oracle UIX 2.2.24.6.0 
 Enterprise Manager plugin Common Files 11.2.0.3.0 
 HAS Common Files 11.2.0.3.0 
 Precompiler Common Files 11.2.0.3.0 
 Installation Common Files 11.2.0.3.0 
 Oracle Help for the Web 2.0.14.0.0 
 Oracle LDAP administration 11.2.0.3.0 
 Buildtools Common Files 11.2.0.3.0 
 Assistant Common Files 11.2.0.3.0 
 Oracle Recovery Manager 11.2.0.3.0 
 PL/SQL 11.2.0.3.0 
 Generic Connectivity Common Files 11.2.0.3.0 
 Oracle Database Gateway for ODBC 11.2.0.3.0 
 Oracle Programmer 11.2.0.3.0 
 Oracle Database Utilities 11.2.0.3.0 
 Enterprise Manager Agent 10.2.0.4.3 
 SQL*Plus 11.2.0.3.0 
 Oracle Netca Client 11.2.0.3.0 
 Oracle Multimedia Locator 11.2.0.3.0 
 Oracle Call Interface (OCI) 11.2.0.3.0 
 Oracle Multimedia 11.2.0.3.0 
 Oracle Net 11.2.0.3.0 
 Oracle XML Development Kit 11.2.0.3.0 
 Database Configuration and Upgrade Assistants 11.2.0.3.0 
 Oracle JVM 11.2.0.3.0 
 Oracle Advanced Security 11.2.0.3.0 
 Oracle Internet Directory Client 11.2.0.3.0 
 Oracle Enterprise Manager Console DB 11.2.0.3.0 
 HAS Files for DB 11.2.0.3.0 
 Oracle Net Listener 11.2.0.3.0 
 Oracle Text 11.2.0.3.0 
 Oracle Net Services 11.2.0.3.0 
 Oracle Database 11g 11.2.0.3.0 
 Oracle OLAP 11.2.0.3.0 
 Oracle Spatial 11.2.0.3.0 
 Oracle Partitioning 11.2.0.3.0 
 Enterprise Edition Options 11.2.0.3.0 
-----------------------------------------------------------------------------

Instantiating scripts for add node (Tuesday, December 24, 2013 2:22:26 PM IST)
. 1% Done.
Instantiation of add node scripts complete
Copying to remote nodes (Tuesday, December 24, 2013 2:22:40 PM IST)
............................................................................................... 96% Done.
Home copied to new nodes
Saving inventory on nodes (Tuesday, December 24, 2013 2:36:10 PM IST)
. 100% Done.
Save inventory complete
WARNING:
The following configuration scripts need to be executed as the "root" user in each new cluster node. Each script in the list below is followed by a list of nodes.
/u01/app/oracle/product/11.2.0/dbhome_1/root.sh #On nodes rac3
To execute the configuration scripts:
 1. Open a terminal window
 2. Log in as "root"
 3. Run the scripts in each cluster node

The Cluster Node Addition of /u01/app/oracle/product/11.2.0/dbhome_1 was successful.
Please check '/tmp/silentInstall.log' for more details.
39 40
41
Now run root.sh on rac3 node
42
Add Instance to Clustered Database
A database instance will be established on the new node. Specifically, an instance named “orcl3” will be added to “orcl” – a pre-existing clustered database.
Satisfy Node Instance Dependencies
Satisfy all node instance dependencies, such as passwordfile, init.ora parameters, etc.
From the new node “rac3”, run the following commands to create the passwordfile, “init.ora” file, and “oratab” entry for the new instance
[root@rac3 Desktop]# su - oracle
[oracle@rac3 ~]$ export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
[oracle@rac3 ~]$ cd $ORACLE_HOME/dbs
[oracle@rac3 dbs]$ ls
hc_orcl1.dat  init.ora  initorcl1.ora  orapworcl1
[oracle@rac3 dbs]$ mv initorcl1.ora initorcl3.ora
[oracle@rac3 dbs]$ mv orapworcl1 orapworcl3
[oracle@rac3 dbs]$ echo "orcl3:$ORACLE_HOME:N" >> /etc/oratab
[oracle@rac3 dbs]$ 
43
From a node with an existing instance of “orcl” issue the following commands to create the needed public log thread, undo tablespace, and “init.ora” entries for the new instance



From RAC1 node





[oracle@rac1 bin]$ ps -ef | grep smon





root      2876     1  4 12:39 ?        00:05:59 /u01/app/11.2.0/grid/bin/osysmond.bin





oracle    3137     1  0 12:40 ?        00:00:00 asm_smon_+ASM1





oracle    3495     1  0 12:41 ?        00:00:03 ora_smon_orcl1





oracle   11417 10077  0 14:50 pts/2    00:00:00 grep smon





[oracle@rac1 bin]$ export ORACLE_SID=orcl1





[oracle@rac1 bin]$ export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1





[oracle@rac1 bin]$ export PATH=$ORACLE_HOME/bin:$PATH





[oracle@rac1 bin]$ sqlplus ‘/as sysdba’





SQL*Plus: Release 11.2.0.3.0 Production on Tue Dec 24 14:51:32 2013





Copyright (c) 1982, 2011, Oracle.  All rights reserved.





Connected to:





Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 – 64bit Production





With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,





Data Mining and Real Application Testing options





SQL>


44

SQL> alter database add logfile thread 3 group 5 ('+DATA') size 50M, group 6 ('+DATA') size 50M; 

Database altered. 

SQL> alter database enable public thread 3; 

Database altered. 

SQL> create undo tablespace undotbs3 datafile '+DATA' size 200M autoextend on; 

Tablespace created. 

SQL> alter system set undo_tablespace='undotbs3' scope=spfile sid='orcl3'; 

System altered. 

SQL> alter system set instance_number=3 scope=spfile sid='orcl3'; 

System altered. 

SQL> alter system set cluster_database_instances=3 scope=spfile sid='*'; 

System altered.
 45



Update Oracle Cluster Registry (OCR)
The OCR will be updated to account for a new instance – “orcl3” – being added to the “orcl” cluster database. Add “orcl3” instance to the “orcl” database and verify



46



Start the Instance
Now that all the prerequisites have been satisfied and OCR updated, the “orcl3” instance will be started. Start the newly created instance – “orcl3” – and verify



47


SQL> col host_name format a11 
SQL> set line 300 
SQL> select INSTANCE_NAME,HOST_NAME,VERSION,STARTUP_TIME,STATUS,ACTIVE_STATE,INSTANCE_ROLE,DATABASE_STATUS from gv$INSTANCE;
INSTANCE_NAME HOST_NAME VERSION STARTUP_TIME STATUS ACTIVE_ST INSTANCE_ROLE DATABASE_STATUS 
---------------- ----------- ----------------- ------------------- ------------ --------- ------------------ ----------------- 
orcl3 rac3.localdomain 11.2.0.3.0 2013-01-05 11:23:16 OPEN NORMAL PRIMARY_INSTANCE ACTIVE 
orcl1 rac1.localdomain 11.2.0.3.0 2013-01-05 09:53:24 OPEN NORMAL PRIMARY_INSTANCE ACTIVE 
orcl2 rac2.localdomain 11.2.0.3.0 2013-01-04 17:34:40 OPEN NORMAL PRIMARY_INSTANCE ACTIVE 48















at







































No comments:















Post a Comment























        

      









Subscribe to:
Post Comments (Atom)









OEM Agent Installation



./agentDeploy.sh AGENT_BASE_DIR=/u001/oracle/product/agent13c OMS_HOST=oem-dev.xxx.com EM_UPLOAD_PORT=1159 AGENT_REGISTRATION_PASSWORD=*****...