Password less SSH

HowTo: Setup SSH Keys on a Linux / Unix System

Irecently read that SSH keys provide a secure way of logging into a Linux and Unix-based server. How do I set up SSH keys on a Linux or Unix based systems? In SSH for Linux/Unix, how do I set up public key authentication?

I am assuming that you are using Linux or Unix-like server and client with the following software:

• OpenSSH SSHD server
• OpenSSH ssh client and friends on Linux (Ubuntu, Debian, {Free,Open,Net}BSD, RHEL, CentOS, OSX and co).

What is a public key authentication?

1. Passwords based authentication
2. Public key based authentication. It is an alternative security method to using passwords. This method is recommended on a VPS, cloud, dedicated or even home based server.

How do I set up public key authentication?

You must generate both a public and a private key pair. For example:

                        ///////////
                       //Internet//
                       ////////////
                            |
     +---------------+      |       +-------------+
     | Unix/Linux    |      |       | Linux/Unix  |
     | Server with   +------+-------+ OSX/*BSD    |
     | OpenSSH SSHD  |              | Client      |
     +---------------+              +-------------+
  server1.cyberciti.biz          client1.cyberciti.biz
     75.126.153.206                  192.168.1.42

Where,

• server1.cyberciti.biz - You store your public key on the remote hosts and you have an accounts on this Linux/Unix based server.
• client1.cyberciti.biz - Your private key stays on the desktop/laptop/ computer (or local server) you use to connect to server1.cyberciti.biz server. Do not share or give your private file to anyone.

In public key based method you can log into remote hosts and server, and transfer files to them, without using your account passwords. Feel free to replace server1.cyberciti.biz and client1.cyberciti.biz names with your actual setup. Enough talk, let's set up public key authentication. Open the Terminal and type following commands if .ssh directory does not exists:

 
mkdir -p $HOME/.ssh
chmod 0700 $HOME/.ssh
 

#1: Create the key pair

On the computer (such as client1.cyberciti.biz), generate a key pair for the protocol.

 
ssh-keygen -t rsa
 

Sample outputs:

Generating public/private rsa key pair.
Enter file in which to save the key (/Users/vivek/.ssh/id_rsa):
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /Users/vivek/.ssh/id_rsa.
Your public key has been saved in /Users/vivek/.ssh/id_rsa.pub.
The key fingerprint is:
80:5f:25:7c:f4:90:aa:e1:f4:a0:01:43:4e:e8:bc:f5 vivek@desktop01
The key's randomart image is:
+--[ RSA 2048]----+
| oo    ...+.     |
|.oo  .  .ooo     |
|o .o. . .o  .    |
| o ...+o.        |
|  o .=.=S        |
| .  .Eo .        |
|                 |
|                 |
|                 |
+-----------------+

You need to set the Key Pair location and name. I recommend you use the default location if you do not yet have another key there, for example: $HOME/.ssh/id_rsa. You will be prompted to supply a passphrase (password) for your private key. I suggest that you setup a passphrase when prompted. You should see two new files in $HOME/.ssh/ directory:

1. $HOME/.ssh/id_rsa - contains your private key.
2. $HOME/.ssh/id_rsa.pub - contain your public key.

#2: Install the public key in remote server

Use scp or ssh-copy-id command to copy your public key file (e.g., $HOME/.ssh/id_rsa.pub) to your account on the remote server/host (e.g., nixcraft@server1.cyberciti.biz). To do so, enter the following command on your client1.cyberciti.biz:

 
ssh-copy-id -i $HOME/.ssh/id_rsa.pub user@server1.cyberciti.biz
 

OR just copy the public key in remote server as authorized_keys in ~/.ssh/ directory:

 
scp $HOME/.ssh/id_rsa.pub user@server1.cyberciti.biz:~/.ssh/authorized_keys
 

A note about appending the public key in remote server

On some system ssh-copy-id command may not be installed, so use the following commands (when prompted provide the password for remote user account called vivek) to install and append the public key:

## First create .ssh directory on server ##
ssh vivek@server1.cyberciti.biz "umask 077; test -d .ssh || mkdir .ssh"
 
## cat local id.rsa.pub file and pipe over ssh to append the public key in remote server ##
cat $HOME/.ssh/id_rsa.pub | ssh vivek@server1.cyberciti.biz "cat >> .ssh/authorized_keys"
 

#3: Test it (type command on client1.cyberciti.biz)

The syntax is:

 
ssh user@server1.cyberciti.biz
 

Or copy a text file called foo.txt:

 
scp foo.txt user@server1.cyberciti.biz:/tmp/
 

You will be prompted for a passphrase. To get rid of passphrase whenever you log in the remote host, try ssh-agent and ssh-add commands.

What are ssh-agent and ssh-add, and how do I use them?

To get rid of a passphrase for the current session, add a passphrase to ssh-agent and you will not be prompted for it when using ssh or scp/sftp/rsync to connect to hosts with your public key. The syntax is as follows:

 
eval $(ssh-agent)
 

Type the ssh-add command to prompt the user for a private key passphrase and adds it to the list maintained by ssh-agent command:

 
ssh-add
 

Enter your private key passphrase. Now try again to log into user@server1.cyberciti.biz and you will not be prompted for a password:

 
ssh user@server1.cyberciti.biz
 

#4: Disable the password based login on a server

Login to your server, type:

## client commands ##
eval $(ssh-agent)
ssh-add
ssh user@server1.cyberciti.biz<

Edit /etc/ssh/sshd_config on server1.cyberciti.biz using a text editor such as nano or vim:
$ sudo vim /etc/ssh/sshd_config
OR directly jump to PermitRootLogin line using a vim text editor:
$ sudo vim +/PermitRootLogin /etc/ssh/sshd_config
Find PermitRootLogin and set it as follows:

 
PermitRootLogin no
 

Save and close the file. Reload/restart sshd server, type command as per your Linux/Unix version:

## CentOS/RHEL/Fedora Linux server reload sshd ##
sudo service sshd reload
 
## Debian/Ubuntu Linux server reload sshd ##
/etc/init.d/ssh reload
 
## Generic Unix method to reload sshd ##
kill -HUP `cat /var/run/sshd.pid`
 

#5: How to add or replace a passphrase for an existing private key?

To to change your passphrase type the following command:

 
ssh-keygen -p
 

#6: How to backup an existing private/public key?

Just copy files to your backup server or external USB pen/hard drive:

## Copy files to  home based nas server ##
rsync -avr $HOME/.ssh user@home.nas-server:/path/to/encrpted/nas/partition/
 
## Copy files to  usb pen drive mounted at /mnt/usb ##
cp -avr $HOME/.ssh/ /mnt/usb/backups/